China High Quality Domestic Heat Pump Systems Factories – 400L Air Source Heat Pump Water Heater – solarshine

Description of SolarShine Heat Pump Water Heater

Working principle of condenser:

Condenser is a part of refrigeration system and belongs to a kind of heat exchanger. It can convert gas or steam into liquid and quickly transfer the heat in the pipe to the air near the pipe. The gas passes through a long tube (usually coiled into a solenoid) so that heat is dissipated into the surrounding air. Copper and other metals have strong thermal conductivity and are often used to transport steam. In order to improve the efficiency of the condenser, a radiator with excellent thermal conductivity is often installed on the pipeline to increase the heat dissipation area, accelerate the heat dissipation, and accelerate the air convection through the fan to take away the heat. The working process of the condenser is exothermic, so the temperature of the condenser is relatively high.

Working principle of evaporator:

Evaporator is a very important part of air to water heat pump. The low-temperature condensed “liquid” (refrigerant) after compression and liquefaction passes through the evaporator to exchange heat with the outside air, and “gasification” absorbs heat to reduce the temperature of the surrounding medium, so as to achieve the refrigeration effect.

Specification of SolarShine Heat Pump Water Heater

Low pressure gaseous refrigerant enters the compressor and is compressed into high temperature and high pressure gas. At this time, the boiling point of the refrigerant increases with the increase of pressure. The refrigerant with high boiling point enters the condenser and begins to liquefy. At this time, the refrigerant releases heat and becomes liquid. Then, before entering the evaporator, it passes through the expansion valve (throttle valve) to reduce the pressure of the refrigerant, and the reduced refrigerant begins to evaporate in the evaporator. At this time, the refrigerant absorbs heat and becomes a low-pressure gas again. Enter the compressor again to form the whole refrigerant circulation system.